# $OpenLDAP: pkg/ldap/servers/slapd/schema/cosine.schema,v 1.6.2.5 2001/01/17 01:55:23 kurt Exp $ # # RFC1274: Cosine and Internet X.500 schema # # This file contains LDAPv3 schema derived from X.500 COSINE "pilot" # schema. As this schema was defined for X.500(89), some # oddities were introduced in the mapping to LDAPv3. The # mappings were based upon: draft-ietf-asid-ldapv3-attributes-03.txt # (a work in progress) # # Note: It seems that the pilot schema evolved beyond what was # described in RFC1274. However, this document attempts to describes # RFC1274 as published. # # Depends on core.schema # Network Working Group P. Barker # Request for Comments: 1274 S. Kille # University College London # November 1991 # # The COSINE and Internet X.500 Schema # # [trimmed] # # Abstract # # This document suggests an X.500 Directory Schema, or Naming # Architecture, for use in the COSINE and Internet X.500 pilots. The # schema is independent of any specific implementation. As well as # indicating support for the standard object classes and attributes, a # large number of generally useful object classes and attributes are # also defined. An appendix to this document includes a machine # processable version of the schema. # # [trimmed] # 7. Object Identifiers # # Some additional object identifiers are defined for this schema. # These are also reproduced in Appendix C. # # data OBJECT IDENTIFIER ::= {ccitt 9} # pss OBJECT IDENTIFIER ::= {data 2342} # ucl OBJECT IDENTIFIER ::= {pss 19200300} # pilot OBJECT IDENTIFIER ::= {ucl 100} # # pilotAttributeType OBJECT IDENTIFIER ::= {pilot 1} # pilotAttributeSyntax OBJECT IDENTIFIER ::= {pilot 3} # pilotObjectClass OBJECT IDENTIFIER ::= {pilot 4} # pilotGroups OBJECT IDENTIFIER ::= {pilot 10} # # iA5StringSyntax OBJECT IDENTIFIER ::= {pilotAttributeSyntax 4} # caseIgnoreIA5StringSyntax OBJECT IDENTIFIER ::= # {pilotAttributeSyntax 5} # # 8. Object Classes # [relocated after 9] # # 9. Attribute Types # # 9.1. X.500 standard attribute types # # A number of generally useful attribute types are defined in X.520, # and these are supported. Refer to that document for descriptions of # the suggested usage of these attribute types. The ASN.1 for these # attribute types is reproduced for completeness in Appendix C. # # 9.2. X.400 standard attribute types # # The standard X.400 attribute types are supported. See X.402 for full # details. The ASN.1 for these attribute types is reproduced in # Appendix C. # # 9.3. COSINE/Internet attribute types # # This section describes all the attribute types defined for use in the # COSINE and Internet pilots. Descriptions are given as to the # suggested usage of these attribute types. The ASN.1 for these # attribute types is reproduced in Appendix C. # # 9.3.1. Userid # # The Userid attribute type specifies a computer system login name. # # userid ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-user-identifier)) # ::= {pilotAttributeType 1} # #(in core.schema) ##attributetype ( 0.9.2342.19200300.100.1.1 NAME ( 'uid' 'userid' ) ## EQUALITY caseIgnoreMatch ## SUBSTR caseIgnoreSubstringsMatch ## SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.2. Text Encoded O/R Address # # The Text Encoded O/R Address attribute type specifies a text encoding # of an X.400 O/R address, as specified in RFC 987. The use of this # attribute is deprecated as the attribute is intended for interim use # only. This attribute will be the first candidate for the attribute # expiry mechanisms! # # textEncodedORAddress ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-text-encoded-or-address)) # ::= {pilotAttributeType 2} # attributetype ( 0.9.2342.19200300.100.1.2 NAME 'textEncodedORAddress' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.3. RFC 822 Mailbox # # The RFC822 Mailbox attribute type specifies an electronic mailbox # attribute following the syntax specified in RFC 822. Note that this # attribute should not be used for greybook or other non-Internet order # mailboxes. # # rfc822Mailbox ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreIA5StringSyntax # (SIZE (1 .. ub-rfc822-mailbox)) # ::= {pilotAttributeType 3} # #(in core.schema) ##attributetype ( 0.9.2342.19200300.100.1.3 NAME ( 'mail' 'rfc822Mailbox' ) ## EQUALITY caseIgnoreIA5Match ## SUBSTR caseIgnoreIA5SubstringsMatch ## SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} ) # 9.3.4. Information # # The Information attribute type specifies any general information # pertinent to an object. It is recommended that specific usage of # this attribute type is avoided, and that specific requirements are # met by other (possibly additional) attribute types. # # info ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-information)) # ::= {pilotAttributeType 4} # attributetype ( 0.9.2342.19200300.100.1.4 NAME 'info' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{2048} ) # 9.3.5. Favourite Drink # # The Favourite Drink attribute type specifies the favourite drink of # an object (or person). # # favouriteDrink ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-favourite-drink)) # ::= {pilotAttributeType 5} # attributetype ( 0.9.2342.19200300.100.1.5 NAME ( 'drink' 'favouriteDrink' ) EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.6. Room Number # # The Room Number attribute type specifies the room number of an # object. Note that the commonName attribute should be used for naming # room objects. # # roomNumber ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-room-number)) # ::= {pilotAttributeType 6} # attributetype ( 0.9.2342.19200300.100.1.6 NAME 'roomNumber' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.7. Photo # # The Photo attribute type specifies a "photograph" for an object. # This should be encoded in G3 fax as explained in recommendation T.4, # with an ASN.1 wrapper to make it compatible with an X.400 BodyPart as # defined in X.420. # # IMPORT G3FacsimileBodyPart FROM { mhs-motis ipms modules # information-objects } # # photo ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # CHOICE { # g3-facsimile [3] G3FacsimileBodyPart # } # (SIZE (1 .. ub-photo)) # ::= {pilotAttributeType 7} # attributetype ( 0.9.2342.19200300.100.1.7 NAME 'photo' SYNTAX 1.3.6.1.4.1.1466.115.121.1.23{25000} ) # 9.3.8. User Class # # The User Class attribute type specifies a category of computer user. # The semantics placed on this attribute are for local interpretation. # Examples of current usage od this attribute in academia are # undergraduate student, researcher, lecturer, etc. Note that the # organizationalStatus attribute may now often be preferred as it makes # no distinction between computer users and others. # # userClass ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-user-class)) # ::= {pilotAttributeType 8} # attributetype ( 0.9.2342.19200300.100.1.8 NAME 'userClass' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.9. Host # # The Host attribute type specifies a host computer. # # host ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-host)) # ::= {pilotAttributeType 9} # attributetype ( 0.9.2342.19200300.100.1.9 NAME 'host' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.10. Manager # # The Manager attribute type specifies the manager of an object # represented by an entry. # # manager ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # distinguishedNameSyntax # ::= {pilotAttributeType 10} # attributetype ( 0.9.2342.19200300.100.1.10 NAME 'manager' EQUALITY distinguishedNameMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 ) # 9.3.11. Document Identifier # # The Document Identifier attribute type specifies a unique identifier # for a document. # # documentIdentifier ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-document-identifier)) # ::= {pilotAttributeType 11} # attributetype ( 0.9.2342.19200300.100.1.11 NAME 'documentIdentifier' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.12. Document Title # # The Document Title attribute type specifies the title of a document. # # documentTitle ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-document-title)) # ::= {pilotAttributeType 12} # attributetype ( 0.9.2342.19200300.100.1.12 NAME 'documentTitle' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.13. Document Version # # The Document Version attribute type specifies the version number of a # document. # # documentVersion ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-document-version)) # ::= {pilotAttributeType 13} # attributetype ( 0.9.2342.19200300.100.1.13 NAME 'documentVersion' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.14. Document Author # # The Document Author attribute type specifies the distinguished name # of the author of a document. # # documentAuthor ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # distinguishedNameSyntax # ::= {pilotAttributeType 14} # attributetype ( 0.9.2342.19200300.100.1.14 NAME 'documentAuthor' EQUALITY distinguishedNameMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 ) # 9.3.15. Document Location # # The Document Location attribute type specifies the location of the # document original. # # documentLocation ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-document-location)) # ::= {pilotAttributeType 15} # attributetype ( 0.9.2342.19200300.100.1.15 NAME 'documentLocation' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.16. Home Telephone Number # # The Home Telephone Number attribute type specifies a home telephone # number associated with a person. Attribute values should follow the # agreed format for international telephone numbers: i.e., "+44 71 123 # 4567". # # homeTelephoneNumber ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # telephoneNumberSyntax # ::= {pilotAttributeType 20} # attributetype ( 0.9.2342.19200300.100.1.20 NAME ( 'homePhone' 'homeTelephoneNumber' ) EQUALITY telephoneNumberMatch SUBSTR telephoneNumberSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.50 ) # 9.3.17. Secretary # # The Secretary attribute type specifies the secretary of a person. # The attribute value for Secretary is a distinguished name. # # secretary ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # distinguishedNameSyntax # ::= {pilotAttributeType 21} # attributetype ( 0.9.2342.19200300.100.1.21 NAME 'secretary' EQUALITY distinguishedNameMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 ) # 9.3.18. Other Mailbox # # The Other Mailbox attribute type specifies values for electronic # mailbox types other than X.400 and rfc822. # # otherMailbox ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # SEQUENCE { # mailboxType PrintableString, -- e.g. Telemail # mailbox IA5String -- e.g. X378:Joe # } # ::= {pilotAttributeType 22} # attributetype ( 0.9.2342.19200300.100.1.22 NAME 'otherMailbox' SYNTAX 1.3.6.1.4.1.1466.115.121.1.39 ) # 9.3.19. Last Modified Time # # The Last Modified Time attribute type specifies the last time, in UTC # time, that an entry was modified. Ideally, this attribute should be # maintained by the DSA. # # lastModifiedTime ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # uTCTimeSyntax # ::= {pilotAttributeType 23} # ## OBSOLETE attributetype ( 0.9.2342.19200300.100.1.23 NAME 'lastModifiedTime' SYNTAX 1.3.6.1.4.1.1466.115.121.1.53 ) # 9.3.20. Last Modified By # # The Last Modified By attribute specifies the distinguished name of # the last user to modify the associated entry. Ideally, this # attribute should be maintained by the DSA. # # lastModifiedBy ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # distinguishedNameSyntax # ::= {pilotAttributeType 24} # ## OBSOLETE attributetype ( 0.9.2342.19200300.100.1.24 NAME 'lastModifiedBy' EQUALITY distinguishedNameMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 ) # 9.3.21. Domain Component # # The Domain Component attribute type specifies a DNS/NRS domain. For # example, "uk" or "ac". # # domainComponent ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreIA5StringSyntax # SINGLE VALUE # ::= {pilotAttributeType 25} # ##(in core.schema) ##attributetype ( 0.9.2342.19200300.100.1.25 NAME ( 'dc' 'domainComponent' ) ## EQUALITY caseIgnoreIA5Match ## SUBSTR caseIgnoreIA5SubstringsMatch ## SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) # 9.3.22. DNS ARecord # # The A Record attribute type specifies a type A (Address) DNS resource # record [6] [7]. # # aRecord ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # DNSRecordSyntax # ::= {pilotAttributeType 26} # ## incorrect syntax? attributetype ( 0.9.2342.19200300.100.1.26 NAME 'aRecord' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) ## missing from RFC1274 ## incorrect syntax? attributetype ( 0.9.2342.19200300.100.1.27 NAME 'mDRecord' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) # 9.3.23. MX Record # # The MX Record attribute type specifies a type MX (Mail Exchange) DNS # resource record [6] [7]. # # mXRecord ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # DNSRecordSyntax # ::= {pilotAttributeType 28} # ## incorrect syntax!! attributetype ( 0.9.2342.19200300.100.1.28 NAME 'mXRecord' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) # 9.3.24. NS Record # # The NS Record attribute type specifies an NS (Name Server) DNS # resource record [6] [7]. # # nSRecord ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # DNSRecordSyntax # ::= {pilotAttributeType 29} # ## incorrect syntax!! attributetype ( 0.9.2342.19200300.100.1.29 NAME 'nSRecord' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) # 9.3.25. SOA Record # # The SOA Record attribute type specifies a type SOA (Start of # Authority) DNS resorce record [6] [7]. # # sOARecord ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # DNSRecordSyntax # ::= {pilotAttributeType 30} # ## incorrect syntax!! attributetype ( 0.9.2342.19200300.100.1.30 NAME 'sOARecord' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) # 9.3.26. CNAME Record # # The CNAME Record attribute type specifies a type CNAME (Canonical # Name) DNS resource record [6] [7]. # # cNAMERecord ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # iA5StringSyntax # ::= {pilotAttributeType 31} # ## incorrect syntax!! attributetype ( 0.9.2342.19200300.100.1.31 NAME 'cNAMERecord' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) # 9.3.27. Associated Domain # # The Associated Domain attribute type specifies a DNS or NRS domain # which is associated with an object in the DIT. For example, the entry # in the DIT with a distinguished name "C=GB, O=University College # London" would have an associated domain of "UCL.AC.UK. Note that all # domains should be represented in rfc822 order. See [3] for more # details of usage of this attribute. # # associatedDomain ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreIA5StringSyntax # ::= {pilotAttributeType 37} # #attributetype ( 0.9.2342.19200300.100.1.37 NAME 'associatedDomain' # EQUALITY caseIgnoreIA5Match # SUBSTR caseIgnoreIA5SubstringsMatch # SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) # 9.3.28. Associated Name # # The Associated Name attribute type specifies an entry in the # organisational DIT associated with a DNS/NRS domain. See [3] for # more details of usage of this attribute. # # associatedName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # distinguishedNameSyntax # ::= {pilotAttributeType 38} # attributetype ( 0.9.2342.19200300.100.1.38 NAME 'associatedName' EQUALITY distinguishedNameMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 ) # 9.3.29. Home postal address # # The Home postal address attribute type specifies a home postal # address for an object. This should be limited to up to 6 lines of 30 # characters each. # # homePostalAddress ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # postalAddress # MATCHES FOR EQUALITY # ::= {pilotAttributeType 39} # attributetype ( 0.9.2342.19200300.100.1.39 NAME 'homePostalAddress' EQUALITY caseIgnoreListMatch SUBSTR caseIgnoreListSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.41 ) # 9.3.30. Personal Title # # The Personal Title attribute type specifies a personal title for a # person. Examples of personal titles are "Ms", "Dr", "Prof" and "Rev". # # personalTitle ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-personal-title)) # ::= {pilotAttributeType 40} # attributetype ( 0.9.2342.19200300.100.1.40 NAME 'personalTitle' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.31. Mobile Telephone Number # # The Mobile Telephone Number attribute type specifies a mobile # telephone number associated with a person. Attribute values should # follow the agreed format for international telephone numbers: i.e., # "+44 71 123 4567". # # mobileTelephoneNumber ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # telephoneNumberSyntax # ::= {pilotAttributeType 41} # attributetype ( 0.9.2342.19200300.100.1.41 NAME ( 'mobile' 'mobileTelephoneNumber' ) EQUALITY telephoneNumberMatch SUBSTR telephoneNumberSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.50 ) # 9.3.32. Pager Telephone Number # # The Pager Telephone Number attribute type specifies a pager telephone # number for an object. Attribute values should follow the agreed # format for international telephone numbers: i.e., "+44 71 123 4567". # # pagerTelephoneNumber ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # telephoneNumberSyntax # ::= {pilotAttributeType 42} # attributetype ( 0.9.2342.19200300.100.1.42 NAME ( 'pager' 'pagerTelephoneNumber' ) EQUALITY telephoneNumberMatch SUBSTR telephoneNumberSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.50 ) # 9.3.33. Friendly Country Name # # The Friendly Country Name attribute type specifies names of countries # in human readable format. The standard attribute country name must # be one of the two-letter codes defined in ISO 3166. # # friendlyCountryName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # ::= {pilotAttributeType 43} # attributetype ( 0.9.2342.19200300.100.1.43 NAME ( 'co' 'friendlyCountryName' ) EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) # 9.3.34. Unique Identifier # # The Unique Identifier attribute type specifies a "unique identifier" # for an object represented in the Directory. The domain within which # the identifier is unique, and the exact semantics of the identifier, # are for local definition. For a person, this might be an # institution-wide payroll number. For an organisational unit, it # might be a department code. # # uniqueIdentifier ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-unique-identifier)) # ::= {pilotAttributeType 44} # attributetype ( 0.9.2342.19200300.100.1.44 NAME 'uniqueIdentifier' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.35. Organisational Status # # The Organisational Status attribute type specifies a category by # which a person is often referred to in an organisation. Examples of # usage in academia might include undergraduate student, researcher, # lecturer, etc. # # A Directory administrator should probably consider carefully the # distinctions between this and the title and userClass attributes. # # organizationalStatus ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-organizational-status)) # ::= {pilotAttributeType 45} # attributetype ( 0.9.2342.19200300.100.1.45 NAME 'organizationalStatus' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.36. Janet Mailbox # # The Janet Mailbox attribute type specifies an electronic mailbox # attribute following the syntax specified in the Grey Book of the # Coloured Book series. This attribute is intended for the convenience # of U.K users unfamiliar with rfc822 and little-endian mail addresses. # Entries using this attribute MUST also include an rfc822Mailbox # attribute. # # janetMailbox ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreIA5StringSyntax # (SIZE (1 .. ub-janet-mailbox)) # ::= {pilotAttributeType 46} # attributetype ( 0.9.2342.19200300.100.1.46 NAME 'janetMailbox' EQUALITY caseIgnoreIA5Match SUBSTR caseIgnoreIA5SubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{256} ) # 9.3.37. Mail Preference Option # # An attribute to allow users to indicate a preference for inclusion of # their names on mailing lists (electronic or physical). The absence # of such an attribute should be interpreted as if the attribute was # present with value "no-list-inclusion". This attribute should be # interpreted by anyone using the directory to derive mailing lists, # and its value respected. # # mailPreferenceOption ATTRIBUTE # WITH ATTRIBUTE-SYNTAX ENUMERATED { # no-list-inclusion(0), # any-list-inclusion(1), -- may be added to any lists # professional-list-inclusion(2) # -- may be added to lists # -- which the list provider # -- views as related to the # -- users professional inter- # -- ests, perhaps evaluated # -- from the business of the # -- organisation or keywords # -- in the entry. # } # ::= {pilotAttributeType 47} # attributetype ( 0.9.2342.19200300.100.1.47 NAME 'mailPreferenceOption' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 ) # 9.3.38. Building Name # # The Building Name attribute type specifies the name of the building # where an organisation or organisational unit is based. # # buildingName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-building-name)) # ::= {pilotAttributeType 48} # attributetype ( 0.9.2342.19200300.100.1.48 NAME 'buildingName' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) # 9.3.39. DSA Quality # # The DSA Quality attribute type specifies the purported quality of a # DSA. It allows a DSA manager to indicate the expected level of # availability of the DSA. See [8] for details of the syntax. # # dSAQuality ATTRIBUTE # WITH ATTRIBUTE-SYNTAX DSAQualitySyntax # SINGLE VALUE # ::= {pilotAttributeType 49} # attributetype ( 0.9.2342.19200300.100.1.49 NAME 'dSAQuality' SYNTAX 1.3.6.1.4.1.1466.115.121.1.19 SINGLE-VALUE ) # 9.3.40. Single Level Quality # # The Single Level Quality attribute type specifies the purported data # quality at the level immediately below in the DIT. See [8] for # details of the syntax. # # singleLevelQuality ATTRIBUTE # WITH ATTRIBUTE-SYNTAX DataQualitySyntax # SINGLE VALUE # ::= {pilotAttributeType 50} # attributetype ( 0.9.2342.19200300.100.1.50 NAME 'singleLevelQuality' SYNTAX 1.3.6.1.4.1.1466.115.121.1.13 SINGLE-VALUE ) # 9.3.41. Subtree Minimum Quality # # The Subtree Minimum Quality attribute type specifies the purported # minimum data quality for a DIT subtree. See [8] for more discussion # and details of the syntax. # # subtreeMinimumQuality ATTRIBUTE # WITH ATTRIBUTE-SYNTAX DataQualitySyntax # SINGLE VALUE # -- Defaults to singleLevelQuality # ::= {pilotAttributeType 51} # attributetype ( 0.9.2342.19200300.100.1.51 NAME 'subtreeMinimumQuality' SYNTAX 1.3.6.1.4.1.1466.115.121.1.13 SINGLE-VALUE ) # 9.3.42. Subtree Maximum Quality # # The Subtree Maximum Quality attribute type specifies the purported # maximum data quality for a DIT subtree. See [8] for more discussion # and details of the syntax. # # subtreeMaximumQuality ATTRIBUTE # WITH ATTRIBUTE-SYNTAX DataQualitySyntax # SINGLE VALUE # -- Defaults to singleLevelQuality # ::= {pilotAttributeType 52} # attributetype ( 0.9.2342.19200300.100.1.52 NAME 'subtreeMaximumQuality' SYNTAX 1.3.6.1.4.1.1466.115.121.1.13 SINGLE-VALUE ) # 9.3.43. Personal Signature # # The Personal Signature attribute type allows for a representation of # a person's signature. This should be encoded in G3 fax as explained # in recommendation T.4, with an ASN.1 wrapper to make it compatible # with an X.400 BodyPart as defined in X.420. # # IMPORT G3FacsimileBodyPart FROM { mhs-motis ipms modules # information-objects } # # personalSignature ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # CHOICE { # g3-facsimile [3] G3FacsimileBodyPart # } # (SIZE (1 .. ub-personal-signature)) # ::= {pilotAttributeType 53} # attributetype ( 0.9.2342.19200300.100.1.53 NAME 'personalSignature' SYNTAX 1.3.6.1.4.1.1466.115.121.1.23 ) # 9.3.44. DIT Redirect # # The DIT Redirect attribute type is used to indicate that the object # described by one entry now has a newer entry in the DIT. The entry # containing the redirection attribute should be expired after a # suitable grace period. This attribute may be used when an individual # changes his/her place of work, and thus acquires a new organisational # DN. # # dITRedirect ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # distinguishedNameSyntax # ::= {pilotAttributeType 54} # attributetype ( 0.9.2342.19200300.100.1.54 NAME 'dITRedirect' EQUALITY distinguishedNameMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 ) # 9.3.45. Audio # # The Audio attribute type allows the storing of sounds in the # Directory. The attribute uses a u-law encoded sound file as used by # the "play" utility on a Sun 4. This is an interim format. # # audio ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # Audio # (SIZE (1 .. ub-audio)) # ::= {pilotAttributeType 55} # attributetype ( 0.9.2342.19200300.100.1.55 NAME 'audio' SYNTAX 1.3.6.1.4.1.1466.115.121.1.4{25000} ) # 9.3.46. Publisher of Document # # # The Publisher of Document attribute is the person and/or organization # that published a document. # # documentPublisher ATTRIBUTE # WITH ATTRIBUTE SYNTAX caseIgnoreStringSyntax # ::= {pilotAttributeType 56} # attributetype ( 0.9.2342.19200300.100.1.56 NAME 'documentPublisher' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) # 9.4. Generally useful syntaxes # # caseIgnoreIA5StringSyntax ATTRIBUTE-SYNTAX # IA5String # MATCHES FOR EQUALITY SUBSTRINGS # # iA5StringSyntax ATTRIBUTE-SYNTAX # IA5String # MATCHES FOR EQUALITY SUBSTRINGS # # # -- Syntaxes to support the DNS attributes # # DNSRecordSyntax ATTRIBUTE-SYNTAX # IA5String # MATCHES FOR EQUALITY # # # NRSInformationSyntax ATTRIBUTE-SYNTAX # NRSInformation # MATCHES FOR EQUALITY # # # NRSInformation ::= SET { # [0] Context, # [1] Address-space-id, # routes [2] SEQUENCE OF SEQUENCE { # Route-cost, # Addressing-info } # } # # # 9.5. Upper bounds on length of attribute values # # # ub-document-identifier INTEGER ::= 256 # # ub-document-location INTEGER ::= 256 # # ub-document-title INTEGER ::= 256 # # ub-document-version INTEGER ::= 256 # # ub-favourite-drink INTEGER ::= 256 # # ub-host INTEGER ::= 256 # # ub-information INTEGER ::= 2048 # # ub-unique-identifier INTEGER ::= 256 # # ub-personal-title INTEGER ::= 256 # # ub-photo INTEGER ::= 250000 # # ub-rfc822-mailbox INTEGER ::= 256 # # ub-room-number INTEGER ::= 256 # # ub-text-or-address INTEGER ::= 256 # # ub-user-class INTEGER ::= 256 # # ub-user-identifier INTEGER ::= 256 # # ub-organizational-status INTEGER ::= 256 # # ub-janet-mailbox INTEGER ::= 256 # # ub-building-name INTEGER ::= 256 # # ub-personal-signature ::= 50000 # # ub-audio INTEGER ::= 250000 # # [back to 8] # 8. Object Classes # # 8.1. X.500 standard object classes # # A number of generally useful object classes are defined in X.521, and # these are supported. Refer to that document for descriptions of the # suggested usage of these object classes. The ASN.1 for these object # classes is reproduced for completeness in Appendix C. # # 8.2. X.400 standard object classes # # A number of object classes defined in X.400 are supported. Refer to # X.402 for descriptions of the usage of these object classes. The # ASN.1 for these object classes is reproduced for completeness in # Appendix C. # # 8.3. COSINE/Internet object classes # # This section attempts to fuse together the object classes designed # for use in the COSINE and Internet pilot activities. Descriptions # are given of the suggested usage of these object classes. The ASN.1 # for these object classes is also reproduced in Appendix C. # # 8.3.1. Pilot Object # # The PilotObject object class is used as a sub-class to allow some # common, useful attributes to be assigned to entries of all other # object classes. # # pilotObject OBJECT-CLASS # SUBCLASS OF top # MAY CONTAIN { # info, # photo, # manager, # uniqueIdentifier, # lastModifiedTime, # lastModifiedBy, # dITRedirect, # audio} # ::= {pilotObjectClass 3} # objectclass ( 0.9.2342.19200300.100.4.3 NAME 'pilotObject' SUP top AUXILIARY MAY ( info $ photo $ manager $ uniqueIdentifier $ lastModifiedTime $ lastModifiedBy $ dITRedirect $ audio ) ) # 8.3.2. Pilot Person # # The PilotPerson object class is used as a sub-class of person, to # allow the use of a number of additional attributes to be assigned to # entries of object class person. # # pilotPerson OBJECT-CLASS # SUBCLASS OF person # MAY CONTAIN { # userid, # textEncodedORAddress, # rfc822Mailbox, # favouriteDrink, # roomNumber, # userClass, # homeTelephoneNumber, # homePostalAddress, # secretary, # personalTitle, # preferredDeliveryMethod, # businessCategory, # janetMailbox, # otherMailbox, # mobileTelephoneNumber, # pagerTelephoneNumber, # organizationalStatus, # mailPreferenceOption, # personalSignature} # ::= {pilotObjectClass 4} # objectclass ( 0.9.2342.19200300.100.4.4 NAME ( 'pilotPerson' 'newPilotPerson' ) SUP person STRUCTURAL MAY ( userid $ textEncodedORAddress $ rfc822Mailbox $ favouriteDrink $ roomNumber $ userClass $ homeTelephoneNumber $ homePostalAddress $ secretary $ personalTitle $ preferredDeliveryMethod $ businessCategory $ janetMailbox $ otherMailbox $ mobileTelephoneNumber $ pagerTelephoneNumber $ organizationalStatus $ mailPreferenceOption $ personalSignature ) ) # 8.3.3. Account # # The Account object class is used to define entries representing # computer accounts. The userid attribute should be used for naming # entries of this object class. # # account OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # userid} # MAY CONTAIN { # description, # seeAlso, # localityName, # organizationName, # organizationalUnitName, # host} # ::= {pilotObjectClass 5} # objectclass ( 0.9.2342.19200300.100.4.5 NAME 'account' SUP top STRUCTURAL MUST userid MAY ( description $ seeAlso $ localityName $ organizationName $ organizationalUnitName $ host ) ) # 8.3.4. Document # # The Document object class is used to define entries which represent # documents. # # document OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # documentIdentifier} # MAY CONTAIN { # commonName, # description, # seeAlso, # localityName, # organizationName, # organizationalUnitName, # documentTitle, # documentVersion, # documentAuthor, # documentLocation, # documentPublisher} # ::= {pilotObjectClass 6} # objectclass ( 0.9.2342.19200300.100.4.6 NAME 'document' SUP top STRUCTURAL MUST documentIdentifier MAY ( commonName $ description $ seeAlso $ localityName $ organizationName $ organizationalUnitName $ documentTitle $ documentVersion $ documentAuthor $ documentLocation $ documentPublisher ) ) # 8.3.5. Room # # The Room object class is used to define entries representing rooms. # The commonName attribute should be used for naming pentries of this # object class. # # room OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # commonName} # MAY CONTAIN { # roomNumber, # description, # seeAlso, # telephoneNumber} # ::= {pilotObjectClass 7} # objectclass ( 0.9.2342.19200300.100.4.7 NAME 'room' SUP top STRUCTURAL MUST commonName MAY ( roomNumber $ description $ seeAlso $ telephoneNumber ) ) # 8.3.6. Document Series # # The Document Series object class is used to define an entry which # represents a series of documents (e.g., The Request For Comments # papers). # # documentSeries OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # commonName} # MAY CONTAIN { # description, # seeAlso, # telephoneNumber, # localityName, # organizationName, # organizationalUnitName} # ::= {pilotObjectClass 9} # objectclass ( 0.9.2342.19200300.100.4.9 NAME 'documentSeries' SUP top STRUCTURAL MUST commonName MAY ( description $ seeAlso $ telephonenumber $ localityName $ organizationName $ organizationalUnitName ) ) # 8.3.7. Domain # # The Domain object class is used to define entries which represent DNS # or NRS domains. The domainComponent attribute should be used for # naming entries of this object class. The usage of this object class # is described in more detail in [3]. # # domain OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # domainComponent} # MAY CONTAIN { # associatedName, # organizationName, # organizationalAttributeSet} # ::= {pilotObjectClass 13} # objectclass ( 0.9.2342.19200300.100.4.13 NAME 'domain' SUP top STRUCTURAL MUST domainComponent MAY ( associatedName $ organizationName $ description $ businessCategory $ seeAlso $ searchGuide $ userPassword $ localityName $ stateOrProvinceName $ streetAddress $ physicalDeliveryOfficeName $ postalAddress $ postalCode $ postOfficeBox $ streetAddress $ facsimileTelephoneNumber $ internationalISDNNumber $ telephoneNumber $ teletexTerminalIdentifier $ telexNumber $ preferredDeliveryMethod $ destinationIndicator $ registeredAddress $ x121Address ) ) # 8.3.8. RFC822 Local Part # # The RFC822 Local Part object class is used to define entries which # represent the local part of RFC822 mail addresses. This treats this # part of an RFC822 address as a domain. The usage of this object # class is described in more detail in [3]. # # rFC822localPart OBJECT-CLASS # SUBCLASS OF domain # MAY CONTAIN { # commonName, # surname, # description, # seeAlso, # telephoneNumber, # postalAttributeSet, # telecommunicationAttributeSet} # ::= {pilotObjectClass 14} # objectclass ( 0.9.2342.19200300.100.4.14 NAME 'RFC822localPart' SUP domain STRUCTURAL MAY ( commonName $ surname $ description $ seeAlso $ telephonenumber $ physicalDeliveryOfficeName $ postalAddress $ postalCode $ postOfficeBox $ streetAddress $ facsimileTelephoneNumber $ internationalISDNNumber $ telephoneNumber $ teletexTerminalIdentifier $ telexNumber $ preferredDeliveryMethod $ destinationIndicator $ registeredAddress $ x121Address ) ) # 8.3.9. DNS Domain # # The DNS Domain (Domain NameServer) object class is used to define # entries for DNS domains. The usage of this object class is described # in more detail in [3]. # # dNSDomain OBJECT-CLASS # SUBCLASS OF domain # MAY CONTAIN { # ARecord, # MDRecord, # MXRecord, # NSRecord, # SOARecord, # CNAMERecord} # ::= {pilotObjectClass 15} # objectclass ( 0.9.2342.19200300.100.4.15 NAME 'dNSDomain' SUP 'domain' STRUCTURAL MAY ( ARecord $ MDRecord $ MXRecord $ NSRecord $ SOARecord $ CNAMERecord ) ) # 8.3.10. Domain Related Object # # The Domain Related Object object class is used to define entries # which represent DNS/NRS domains which are "equivalent" to an X.500 # domain: e.g., an organisation or organisational unit. The usage of # this object class is described in more detail in [3]. # # domainRelatedObject OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # associatedDomain} # ::= {pilotObjectClass 17} # objectclass ( 0.9.2342.19200300.100.4.17 NAME 'domainRelatedObject' SUP top AUXILIARY MUST associatedDomain ) # 8.3.11. Friendly Country # # The Friendly Country object class is used to define country entries # in the DIT. The object class is used to allow friendlier naming of # countries than that allowed by the object class country. The naming # attribute of object class country, countryName, has to be a 2 letter # string defined in ISO 3166. # # friendlyCountry OBJECT-CLASS # SUBCLASS OF country # MUST CONTAIN { # friendlyCountryName} # ::= {pilotObjectClass 18} # objectclass ( 0.9.2342.19200300.100.4.18 NAME 'friendlyCountry' SUP country STRUCTURAL MUST friendlyCountryName ) # 8.3.12. Simple Security Object # # The Simple Security Object object class is used to allow an entry to # have a userPassword attribute when an entry's principal object # classes do not allow userPassword as an attribute type. # # simpleSecurityObject OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # userPassword } # ::= {pilotObjectClass 19} # ## (in core.schema) ## objectclass ( 0.9.2342.19200300.100.4.19 NAME 'simpleSecurityObject' ## SUP top AUXILIARY ## MUST userPassword ) # 8.3.13. Pilot Organization # # The PilotOrganization object class is used as a sub-class of # organization and organizationalUnit to allow a number of additional # attributes to be assigned to entries of object classes organization # and organizationalUnit. # # pilotOrganization OBJECT-CLASS # SUBCLASS OF organization, organizationalUnit # MAY CONTAIN { # buildingName} # ::= {pilotObjectClass 20} # objectclass ( 0.9.2342.19200300.100.4.20 NAME 'pilotOrganization' SUP ( organization $ organizationalUnit ) STRUCTURAL MAY buildingName ) # 8.3.14. Pilot DSA # # The PilotDSA object class is used as a sub-class of the dsa object # class to allow additional attributes to be assigned to entries for # DSAs. # # pilotDSA OBJECT-CLASS # SUBCLASS OF dsa # MUST CONTAIN { # dSAQuality} # ::= {pilotObjectClass 21} # objectclass ( 0.9.2342.19200300.100.4.21 NAME 'pilotDSA' SUP dsa STRUCTURAL MAY dSAQuality ) # 8.3.15. Quality Labelled Data # # The Quality Labelled Data object class is used to allow the # assignment of the data quality attributes to subtrees in the DIT. # # See [8] for more details. # # qualityLabelledData OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # dSAQuality} # MAY CONTAIN { # subtreeMinimumQuality, # subtreeMaximumQuality} # ::= {pilotObjectClass 22} objectclass ( 0.9.2342.19200300.100.4.22 NAME 'qualityLabelledData' SUP top AUXILIARY MUST dsaQuality MAY ( subtreeMinimumQuality $ subtreeMaximumQuality ) ) # References # # [1] CCITT/ISO, "X.500, The Directory - overview of concepts, # models and services, CCITT /ISO IS 9594. # # [2] Kille, S., "The THORN and RARE X.500 Naming Architecture, in # University College London, Department of Computer Science # Research Note 89/48, May 1989. # # [3] Kille, S., "X.500 and Domains", RFC 1279, University College # London, November 1991. # # [4] Rose, M., "PSI/NYSERNet White Pages Pilot Project: Status # Report", Technical Report 90-09-10-1, published by NYSERNet # Inc, 1990. # # [5] Craigie, J., "UK Academic Community Directory Service Pilot # Project, pp. 305-310 in Computer Networks and ISDN Systems # 17 (1989), published by North Holland. # # [6] Mockapetris, P., "Domain Names - Concepts and Facilities", # RFC 1034, USC/Information Sciences Institute, November 1987. # # [7] Mockapetris, P., "Domain Names - Implementation and # Specification, RFC 1035, USC/Information Sciences Institute, # November 1987. # # [8] Kille, S., "Handling QOS (Quality of service) in the # Directory," publication in process, March 1991. # # # APPENDIX C - Summary of all Object Classes and Attribute Types # # -- Some Important Object Identifiers # # data OBJECT IDENTIFIER ::= {ccitt 9} # pss OBJECT IDENTIFIER ::= {data 2342} # ucl OBJECT IDENTIFIER ::= {pss 19200300} # pilot OBJECT IDENTIFIER ::= {ucl 100} # # pilotAttributeType OBJECT IDENTIFIER ::= {pilot 1} # pilotAttributeSyntax OBJECT IDENTIFIER ::= {pilot 3} # pilotObjectClass OBJECT IDENTIFIER ::= {pilot 4} # pilotGroups OBJECT IDENTIFIER ::= {pilot 10} # # iA5StringSyntax OBJECT IDENTIFIER ::= {pilotAttributeSyntax 4} # caseIgnoreIA5StringSyntax OBJECT IDENTIFIER ::= # {pilotAttributeSyntax 5} # # -- Standard Object Classes # # top OBJECT-CLASS # MUST CONTAIN { # objectClass} # ::= {objectClass 0} # # # alias OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # aliasedObjectName} # ::= {objectClass 1} # # # country OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # countryName} # MAY CONTAIN { # description, # searchGuide} # ::= {objectClass 2} # # # locality OBJECT-CLASS # SUBCLASS OF top # MAY CONTAIN { # description, # localityName, # stateOrProvinceName, # searchGuide, # seeAlso, # streetAddress} # ::= {objectClass 3} # # # organization OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # organizationName} # MAY CONTAIN { # organizationalAttributeSet} # ::= {objectClass 4} # # # organizationalUnit OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # organizationalUnitName} # MAY CONTAIN { # organizationalAttributeSet} # ::= {objectClass 5} # # # person OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # commonName, # surname} # MAY CONTAIN { # description, # seeAlso, # telephoneNumber, # userPassword} # ::= {objectClass 6} # # # organizationalPerson OBJECT-CLASS # SUBCLASS OF person # MAY CONTAIN { # localeAttributeSet, # organizationalUnitName, # postalAttributeSet, # telecommunicationAttributeSet, # title} # ::= {objectClass 7} # # # organizationalRole OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # commonName} # MAY CONTAIN { # description, # localeAttributeSet, # organizationalUnitName, # postalAttributeSet, # preferredDeliveryMethod, # roleOccupant, # seeAlso, # telecommunicationAttributeSet} # ::= {objectClass 8} # # # groupOfNames OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # commonName, # member} # MAY CONTAIN { # description, # organizationName, # organizationalUnitName, # owner, # seeAlso, # businessCategory} # ::= {objectClass 9} # # # residentialPerson OBJECT-CLASS # SUBCLASS OF person # MUST CONTAIN { # localityName} # MAY CONTAIN { # localeAttributeSet, # postalAttributeSet, # preferredDeliveryMethod, # telecommunicationAttributeSet, # businessCategory} # ::= {objectClass 10} # # # applicationProcess OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # commonName} # MAY CONTAIN { # description, # localityName, # organizationalUnitName, # seeAlso} # ::= {objectClass 11} # # # applicationEntity OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # commonName, # presentationAddress} # MAY CONTAIN { # description, # localityName, # organizationName, # organizationalUnitName, # seeAlso, # supportedApplicationContext} # ::= {objectClass 12} # # # dSA OBJECT-CLASS # SUBCLASS OF applicationEntity # MAY CONTAIN { # knowledgeInformation} # ::= {objectClass 13} # # # device OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # commonName} # MAY CONTAIN { # description, # localityName, # organizationName, # organizationalUnitName, # owner, # seeAlso, # serialNumber} # ::= {objectClass 14} # # # strongAuthenticationUser OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # userCertificate} # ::= {objectClass 15} # # # certificationAuthority OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # cACertificate, # certificateRevocationList, # authorityRevocationList} # MAY CONTAIN { # crossCertificatePair} # ::= {objectClass 16} # # -- Standard MHS Object Classes # # mhsDistributionList OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # commonName, # mhsDLSubmitPermissions, # mhsORAddresses} # MAY CONTAIN { # description, # organizationName, # organizationalUnitName, # owner, # seeAlso, # mhsDeliverableContentTypes, # mhsdeliverableEits, # mhsDLMembers, # mhsPreferredDeliveryMethods} # ::= {mhsObjectClass 0} # # # mhsMessageStore OBJECT-CLASS # SUBCLASS OF applicationEntity # MAY CONTAIN { # description, # owner, # mhsSupportedOptionalAttributes, # mhsSupportedAutomaticActions, # mhsSupportedContentTypes} # ::= {mhsObjectClass 1} # # # mhsMessageTransferAgent OBJECT-CLASS # SUBCLASS OF applicationEntity # MAY CONTAIN { # description, # owner, # mhsDeliverableContentLength} # ::= {mhsObjectClass 2} # # # mhsOrganizationalUser OBJECT-CLASS # SUBCLASS OF organizationalPerson # MUST CONTAIN { # mhsORAddresses} # MAY CONTAIN { # mhsDeliverableContentLength, # mhsDeliverableContentTypes, # mhsDeliverableEits, # mhsMessageStoreName, # mhsPreferredDeliveryMethods } # ::= {mhsObjectClass 3} # # # mhsResidentialUser OBJECT-CLASS # SUBCLASS OF residentialPerson # MUST CONTAIN { # mhsORAddresses} # MAY CONTAIN { # mhsDeliverableContentLength, # mhsDeliverableContentTypes, # mhsDeliverableEits, # mhsMessageStoreName, # mhsPreferredDeliveryMethods } # ::= {mhsObjectClass 4} # # # mhsUserAgent OBJECT-CLASS # SUBCLASS OF applicationEntity # MAY CONTAIN { # mhsDeliverableContentLength, # mhsDeliverableContentTypes, # mhsDeliverableEits, # mhsORAddresses, # owner} # ::= {mhsObjectClass 5} # # # # # -- Pilot Object Classes # # pilotObject OBJECT-CLASS # SUBCLASS OF top # MAY CONTAIN { # info, # photo, # manager, # uniqueIdentifier, # lastModifiedTime, # lastModifiedBy, # dITRedirect, # audio} # ::= {pilotObjectClass 3} # pilotPerson OBJECT-CLASS # SUBCLASS OF person # MAY CONTAIN { # userid, # textEncodedORAddress, # rfc822Mailbox, # favouriteDrink, # roomNumber, # userClass, # homeTelephoneNumber, # homePostalAddress, # secretary, # personalTitle, # preferredDeliveryMethod, # businessCategory, # janetMailbox, # otherMailbox, # mobileTelephoneNumber, # pagerTelephoneNumber, # organizationalStatus, # mailPreferenceOption, # personalSignature} # ::= {pilotObjectClass 4} # # # account OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # userid} # MAY CONTAIN { # description, # seeAlso, # localityName, # organizationName, # organizationalUnitName, # host} # ::= {pilotObjectClass 5} # # # document OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # documentIdentifier} # MAY CONTAIN { # commonName, # description, # seeAlso, # localityName, # organizationName, # organizationalUnitName, # documentTitle, # documentVersion, # documentAuthor, # documentLocation, # documentPublisher} # ::= {pilotObjectClass 6} # # # room OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # commonName} # MAY CONTAIN { # roomNumber, # description, # seeAlso, # telephoneNumber} # ::= {pilotObjectClass 7} # # # documentSeries OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # commonName} # MAY CONTAIN { # description, # seeAlso, # telephoneNumber, # localityName, # organizationName, # organizationalUnitName} # ::= {pilotObjectClass 9} # # # domain OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # domainComponent} # MAY CONTAIN { # associatedName, # organizationName, # organizationalAttributeSet} # ::= {pilotObjectClass 13} # # # rFC822localPart OBJECT-CLASS # SUBCLASS OF domain # MAY CONTAIN { # commonName, # surname, # description, # seeAlso, # telephoneNumber, # postalAttributeSet, # telecommunicationAttributeSet} # ::= {pilotObjectClass 14} # # # dNSDomain OBJECT-CLASS # SUBCLASS OF domain # MAY CONTAIN { # ARecord, # MDRecord, # MXRecord, # NSRecord, # SOARecord, # CNAMERecord} # ::= {pilotObjectClass 15} # # # domainRelatedObject OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # associatedDomain} # ::= {pilotObjectClass 17} # # # friendlyCountry OBJECT-CLASS # SUBCLASS OF country # MUST CONTAIN { # friendlyCountryName} # ::= {pilotObjectClass 18} # # # simpleSecurityObject OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # userPassword } # ::= {pilotObjectClass 19} # # # pilotOrganization OBJECT-CLASS # SUBCLASS OF organization, organizationalUnit # MAY CONTAIN { # buildingName} # ::= {pilotObjectClass 20} # # # pilotDSA OBJECT-CLASS # SUBCLASS OF dsa # MUST CONTAIN { # dSAQuality} # ::= {pilotObjectClass 21} # # # qualityLabelledData OBJECT-CLASS # SUBCLASS OF top # MUST CONTAIN { # dSAQuality} # MAY CONTAIN { # subtreeMinimumQuality, # subtreeMaximumQuality} # ::= {pilotObjectClass 22} # # # # # -- Standard Attribute Types # # objectClass ObjectClass # ::= {attributeType 0} # # # aliasedObjectName AliasedObjectName # ::= {attributeType 1} # # # knowledgeInformation ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreString # ::= {attributeType 2} # # # commonName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreStringSyntax # (SIZE (1..ub-common-name)) # ::= {attributeType 3} # # # surname ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreStringSyntax # (SIZE (1..ub-surname)) # ::= {attributeType 4} # # # serialNumber ATTRIBUTE # WITH ATTRIBUTE-SYNTAX printableStringSyntax # (SIZE (1..ub-serial-number)) # ::= {attributeType 5} # # # countryName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX PrintableString # (SIZE (1..ub-country-code)) # SINGLE VALUE # ::= {attributeType 6} # # # localityName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreStringSyntax # (SIZE (1..ub-locality-name)) # ::= {attributeType 7} # # # stateOrProvinceName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreStringSyntax # (SIZE (1..ub-state-name)) # ::= {attributeType 8} # # # streetAddress ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreStringSyntax # (SIZE (1..ub-street-address)) # ::= {attributeType 9} # # # organizationName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreStringSyntax # (SIZE (1..ub-organization-name)) # ::= {attributeType 10} # # # organizationalUnitName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreStringSyntax # (SIZE (1..ub-organizational-unit-name)) # ::= {attributeType 11} # # # title ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreStringSyntax # (SIZE (1..ub-title)) # ::= {attributeType 12} # # # description ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreStringSyntax # (SIZE (1..ub-description)) # ::= {attributeType 13} # # # searchGuide ATTRIBUTE # WITH ATTRIBUTE-SYNTAX Guide # ::= {attributeType 14} # # # businessCategory ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreStringSyntax # (SIZE (1..ub-business-category)) # ::= {attributeType 15} # # # postalAddress ATTRIBUTE # WITH ATTRIBUTE-SYNTAX PostalAddress # MATCHES FOR EQUALITY # ::= {attributeType 16} # # # postalCode ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreStringSyntax # (SIZE (1..ub-postal-code)) # ::= {attributeType 17} # # # postOfficeBox ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreStringSyntax # (SIZE (1..ub-post-office-box)) # ::= {attributeType 18} # # # physicalDeliveryOfficeName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX caseIgnoreStringSyntax # (SIZE (1..ub-physical-office-name)) # ::= {attributeType 19} # # # telephoneNumber ATTRIBUTE # WITH ATTRIBUTE-SYNTAX telephoneNumberSyntax # (SIZE (1..ub-telephone-number)) # ::= {attributeType 20} # # # telexNumber ATTRIBUTE # WITH ATTRIBUTE-SYNTAX TelexNumber # (SIZE (1..ub-telex)) # ::= {attributeType 21} # # # teletexTerminalIdentifier ATTRIBUTE # WITH ATTRIBUTE-SYNTAX TeletexTerminalIdentifier # (SIZE (1..ub-teletex-terminal-id)) # ::= {attributeType 22} # # # facsimileTelephoneNumber ATTRIBUTE # WITH ATTRIBUTE-SYNTAX FacsimileTelephoneNumber # ::= {attributeType 23} # # # x121Address ATTRIBUTE # WITH ATTRIBUTE-SYNTAX NumericString # (SIZE (1..ub-x121-address)) # ::= {attributeType 24} # # # internationaliSDNNumber ATTRIBUTE # WITH ATTRIBUTE-SYNTAX NumericString # (SIZE (1..ub-isdn-address)) # ::= {attributeType 25} # # # registeredAddress ATTRIBUTE # WITH ATTRIBUTE-SYNTAX PostalAddress # ::= {attributeType 26} # # # destinationIndicator ATTRIBUTE # WITH ATTRIBUTE-SYNTAX PrintableString # (SIZE (1..ub-destination-indicator)) # MATCHES FOR EQUALITY SUBSTRINGS # ::= {attributeType 27} # # # preferredDeliveryMethod ATTRIBUTE # WITH ATTRIBUTE-SYNTAX deliveryMethod # ::= {attributeType 28} # # # presentationAddress ATTRIBUTE # WITH ATTRIBUTE-SYNTAX PresentationAddress # MATCHES FOR EQUALITY # ::= {attributeType 29} # # # supportedApplicationContext ATTRIBUTE # WITH ATTRIBUTE-SYNTAX objectIdentifierSyntax # ::= {attributeType 30} # # # member ATTRIBUTE # WITH ATTRIBUTE-SYNTAX distinguishedNameSyntax # ::= {attributeType 31} # # # owner ATTRIBUTE # WITH ATTRIBUTE-SYNTAX distinguishedNameSyntax # ::= {attributeType 32} # # # roleOccupant ATTRIBUTE # WITH ATTRIBUTE-SYNTAX distinguishedNameSyntax # ::= {attributeType 33} # # # seeAlso ATTRIBUTE # WITH ATTRIBUTE-SYNTAX distinguishedNameSyntax # ::= {attributeType 34} # # # userPassword ATTRIBUTE # WITH ATTRIBUTE-SYNTAX Userpassword # ::= {attributeType 35} # # # userCertificate ATTRIBUTE # WITH ATTRIBUTE-SYNTAX UserCertificate # ::= {attributeType 36} # # # cACertificate ATTRIBUTE # WITH ATTRIBUTE-SYNTAX cACertificate # ::= {attributeType 37} # # # authorityRevocationList ATTRIBUTE # WITH ATTRIBUTE-SYNTAX AuthorityRevocationList # ::= {attributeType 38} # # # certificateRevocationList ATTRIBUTE # WITH ATTRIBUTE-SYNTAX CertificateRevocationList # ::= {attributeType 39} # # # crossCertificatePair ATTRIBUTE # WITH ATTRIBUTE-SYNTAX CrossCertificatePair # ::= {attributeType 40} # # # # # -- Standard MHS Attribute Types # # mhsDeliverableContentLength ATTRIBUTE # WITH ATTRIBUTE-SYNTAX integer # ::= {mhsAttributeType 0} # # # mhsDeliverableContentTypes ATTRIBUTE # WITH ATTRIBUTE-SYNTAX oID # ::= {mhsAttributeType 1} # # # mhsDeliverableEits ATTRIBUTE # WITH ATTRIBUTE-SYNTAX oID # ::= {mhsAttributeType 2} # # # mhsDLMembers ATTRIBUTE # WITH ATTRIBUTE-SYNTAX oRName # ::= {mhsAttributeType 3} # # # mhsDLSubmitPermissions ATTRIBUTE # WITH ATTRIBUTE-SYNTAX dLSubmitPermission # ::= {mhsAttributeType 4} # # # mhsMessageStoreName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX dN # ::= {mhsAttributeType 5} # # # mhsORAddresses ATTRIBUTE # WITH ATTRIBUTE-SYNTAX oRAddress # ::= {mhsAttributeType 6} # # # mhsPreferredDeliveryMethods ATTRIBUTE # WITH ATTRIBUTE-SYNTAX deliveryMethod # ::= {mhsAttributeType 7} # # # mhsSupportedAutomaticActions ATTRIBUTE # WITH ATTRIBUTE-SYNTAX oID # ::= {mhsAttributeType 8} # # # mhsSupportedContentTypes ATTRIBUTE # # WITH ATTRIBUTE-SYNTAX oID # ::= {mhsAttributeType 9} # # # mhsSupportedOptionalAttributes ATTRIBUTE # WITH ATTRIBUTE-SYNTAX oID # ::= {mhsAttributeType 10} # # # # # -- Pilot Attribute Types # # userid ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-user-identifier)) # ::= {pilotAttributeType 1} # # # textEncodedORAddress ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-text-encoded-or-address)) # ::= {pilotAttributeType 2} # # # rfc822Mailbox ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreIA5StringSyntax # (SIZE (1 .. ub-rfc822-mailbox)) # ::= {pilotAttributeType 3} # # # info ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-information)) # ::= {pilotAttributeType 4} # # # favouriteDrink ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-favourite-drink)) # ::= {pilotAttributeType 5} # # # roomNumber ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-room-number)) # ::= {pilotAttributeType 6} # # # photo ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # CHOICE { # g3-facsimile [3] G3FacsimileBodyPart # } # (SIZE (1 .. ub-photo)) # ::= {pilotAttributeType 7} # # # userClass ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-user-class)) # ::= {pilotAttributeType 8} # # # host ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-host)) # ::= {pilotAttributeType 9} # # # manager ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # distinguishedNameSyntax # ::= {pilotAttributeType 10} # # # documentIdentifier ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-document-identifier)) # ::= {pilotAttributeType 11} # # # documentTitle ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-document-title)) # ::= {pilotAttributeType 12} # # # documentVersion ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-document-version)) # ::= {pilotAttributeType 13} # # # documentAuthor ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # distinguishedNameSyntax # ::= {pilotAttributeType 14} # # # documentLocation ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-document-location)) # ::= {pilotAttributeType 15} # # # homeTelephoneNumber ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # telephoneNumberSyntax # ::= {pilotAttributeType 20} # # # secretary ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # distinguishedNameSyntax # ::= {pilotAttributeType 21} # # # otherMailbox ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # SEQUENCE { # mailboxType PrintableString, -- e.g. Telemail # mailbox IA5String -- e.g. X378:Joe # } # ::= {pilotAttributeType 22} # # # lastModifiedTime ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # uTCTimeSyntax # ::= {pilotAttributeType 23} # # # lastModifiedBy ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # distinguishedNameSyntax # ::= {pilotAttributeType 24} # # # domainComponent ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreIA5StringSyntax # SINGLE VALUE # ::= {pilotAttributeType 25} # # # aRecord ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # DNSRecordSyntax # ::= {pilotAttributeType 26} # # # mXRecord ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # DNSRecordSyntax # ::= {pilotAttributeType 28} # # # nSRecord ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # DNSRecordSyntax # ::= {pilotAttributeType 29} # # sOARecord ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # DNSRecordSyntax # ::= {pilotAttributeType 30} # # # cNAMERecord ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # iA5StringSyntax # ::= {pilotAttributeType 31} # # # associatedDomain ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreIA5StringSyntax # ::= {pilotAttributeType 37} # # # associatedName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # distinguishedNameSyntax # ::= {pilotAttributeType 38} # # # homePostalAddress ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # postalAddress # MATCHES FOR EQUALITY # ::= {pilotAttributeType 39} # # # personalTitle ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-personal-title)) # ::= {pilotAttributeType 40} # # # mobileTelephoneNumber ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # telephoneNumberSyntax # ::= {pilotAttributeType 41} # # # pagerTelephoneNumber ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # telephoneNumberSyntax # ::= {pilotAttributeType 42} # # # friendlyCountryName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # ::= {pilotAttributeType 43} # # # uniqueIdentifier ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-unique-identifier)) # ::= {pilotAttributeType 44} # # # organizationalStatus ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-organizational-status)) # ::= {pilotAttributeType 45} # # # janetMailbox ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreIA5StringSyntax # (SIZE (1 .. ub-janet-mailbox)) # ::= {pilotAttributeType 46} # # # mailPreferenceOption ATTRIBUTE # WITH ATTRIBUTE-SYNTAX ENUMERATED { # no-list-inclusion(0), # any-list-inclusion(1), -- may be added to any lists # professional-list-inclusion(2) # -- may be added to lists # -- which the list provider # -- views as related to the # -- users professional inter- # -- ests, perhaps evaluated # -- from the business of the # -- organisation or keywords # -- in the entry. # } # ::= {pilotAttributeType 47} # # # buildingName ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # caseIgnoreStringSyntax # (SIZE (1 .. ub-building-name)) # ::= {pilotAttributeType 48} # # # dSAQuality ATTRIBUTE # WITH ATTRIBUTE-SYNTAX DSAQualitySyntax # SINGLE VALUE # ::= {pilotAttributeType 49} # # # singleLevelQuality ATTRIBUTE # WITH ATTRIBUTE-SYNTAX DataQualitySyntax # SINGLE VALUE # # # subtreeMinimumQuality ATTRIBUTE # WITH ATTRIBUTE-SYNTAX DataQualitySyntax # SINGLE VALUE # -- Defaults to singleLevelQuality # ::= {pilotAttributeType 51} # # # subtreeMaximumQuality ATTRIBUTE # WITH ATTRIBUTE-SYNTAX DataQualitySyntax # SINGLE VALUE # -- Defaults to singleLevelQuality # ::= {pilotAttributeType 52} # # # personalSignature ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # CHOICE { # g3-facsimile [3] G3FacsimileBodyPart # } # (SIZE (1 .. ub-personal-signature)) # ::= {pilotAttributeType 53} # # # dITRedirect ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # distinguishedNameSyntax # ::= {pilotAttributeType 54} # # # audio ATTRIBUTE # WITH ATTRIBUTE-SYNTAX # Audio # (SIZE (1 .. ub-audio)) # ::= {pilotAttributeType 55} # # documentPublisher ATTRIBUTE # WITH ATTRIBUTE SYNTAX caseIgnoreStringSyntax # ::= {pilotAttributeType 56} # # # # -- Generally useful syntaxes # # # caseIgnoreIA5StringSyntax ATTRIBUTE-SYNTAX # IA5String # MATCHES FOR EQUALITY SUBSTRINGS # # # iA5StringSyntax ATTRIBUTE-SYNTAX # IA5String # MATCHES FOR EQUALITY SUBSTRINGS # # # -- Syntaxes to support the DNS attributes # # DNSRecordSyntax ATTRIBUTE-SYNTAX # IA5String # MATCHES FOR EQUALITY # # # NRSInformationSyntax ATTRIBUTE-SYNTAX # NRSInformation # MATCHES FOR EQUALITY # # # NRSInformation ::= SET { # [0] Context, # [1] Address-space-id, # routes [2] SEQUENCE OF SEQUENCE { # Route-cost, # Addressing-info } # } # # # -- Upper bounds on length of attribute values # # # ub-document-identifier INTEGER ::= 256 # # ub-document-location INTEGER ::= 256 # # ub-document-title INTEGER ::= 256 # # ub-document-version INTEGER ::= 256 # # ub-favourite-drink INTEGER ::= 256 # # ub-host INTEGER ::= 256 # # ub-information INTEGER ::= 2048 # # ub-unique-identifier INTEGER ::= 256 # # ub-personal-title INTEGER ::= 256 # # ub-photo INTEGER ::= 250000 # # ub-rfc822-mailbox INTEGER ::= 256 # # ub-room-number INTEGER ::= 256 # # ub-text-or-address INTEGER ::= 256 # # ub-user-class INTEGER ::= 256 # # ub-user-identifier INTEGER ::= 256 # # ub-organizational-status INTEGER ::= 256 # # ub-janet-mailbox INTEGER ::= 256 # # ub-building-name INTEGER ::= 256 # # ub-personal-signature ::= 50000 # # ub-audio INTEGER ::= 250000 # # [remainder of memo trimmed]